Home / Services

What we fix

Mobile welding services for the metal around your home

From a driveway gate that will not latch to a horse trailer with a cracked crossmember, these are the repairs and builds we handle on-site. Pick the service closest to your project, or send a photo and we will sort it out for you.

Bright welding sparks flying in darkness

Quick answer

Our mobile welding services cover six areas: gate repair and new gates, fence welding, trailer repair, railings and handrails, ranch and equipment repair, and custom metal pieces. Every job is welded at your property from a self-powered truck, in steel, stainless or aluminum, with a written quote first.

Metal gate with decorative scrollwork

Gate repair & build

Sagging, dragging and broken gates fixed in place, plus new driveway, walk-through and ranch gates built to fit your opening. We rehang, reinforce, add hinges and latches, and prepare frames for gate operators.

Learn more →

Wire fence with a farm building behind it

Fence welding

Wrought iron, ornamental steel, pipe and ranch fence repairs, from a single snapped picket to new runs. We also weld steel posts for wood privacy fences and fix sections damaged by cars, trees or rust.

Learn more →

White steel spiral staircase

Trailer repair

Utility, boat, car hauler, livestock and camper trailers repaired at your driveway. Tongues, frames, crossmembers, jacks, ramps, fenders and hitch mounts welded and reinforced.

Learn more →

Modern staircase with metal wall and railing

Railings & handrails

Porch, stair, deck and balcony railings repaired or built new in steel, stainless or aluminum. Loose posts, broken balusters and handrails for safer steps are everyday jobs.

Learn more →

Tractor parked in front of a shed

Ranch & equipment

Pens, panels, feeders, cattle guards, hay rings and the implements that keep a small ranch running. We weld broken brackets, hitches and frames right where the equipment sits.

Learn more →

Welder working with sparks flying in a workshop

Custom pieces

BBQ pits, smoker carts, firewood racks, brackets, plant hangers, signs and one-off pieces built to your sketch. Small custom work is welcome, not a bother.

Learn more →

How to choose among our mobile welding services

Start with the thing that is broken or the thing you want built. A metal gate of any size belongs under gate repair and build, even if the fence around it also needs work. Long runs of iron, pipe or ranch fencing go under fence welding. Anything that rolls behind a vehicle belongs under trailer repair.

Steps, porches, decks and balconies fall under railings and handrails, where safety heights and spacing matter. Livestock, pasture and farm implement jobs go under ranch and equipment. If the project does not fit any of those, it is probably a custom piece, and we enjoy those.

Not sure? That is fine. Our mobile welding services overlap on purpose, and one visit often covers a gate, a fence post and a trailer jack in the same afternoon. Just describe everything in your quote request.

What every service includes

No matter which service you book, the basics stay the same. We arrive with our own power, so you do not need an outlet. We protect the area around the weld from sparks and spatter, keep the work zone clear of kids and pets, and grind and finish the joints when we are done.

Every quote is in writing and lists the welding, the materials and the finish. Bare steel gets primer at a minimum, and paint or a cold galvanizing compound when it is part of the job. We tell you how to care for the repair, and we are honest about anything nearby that may need attention soon.

Self-powered welding truck with MIG, TIG and stick capability

Common stock carried on board: square tube, pipe, angle, flat bar

Spark protection, clean setup and full cleanup

Primer, paint or galvanizing touch-up as quoted

Plain-language explanation of the repair before we leave

When is a repair better than a replacement?

Most residential metal can be repaired. Broken welds, snapped hinges, bent pickets and cracked brackets are classic weld fixes that cost far less than new. Repair stops making sense when rust has thinned the metal across a wide area, when a gate or railing was undersized from the start, or when the design itself is the cause of repeated failures.

In those cases we will offer both paths in the quote: a repair with its honest limits and a replacement option with sturdier material. You choose. Read more about how we work on our about page.

Frequently asked questions

Which welding services can you do in one visit?

Most gate, fence, railing, trailer and equipment repairs are one-visit jobs because we carry the welder, power, tools and common steel on the truck. New builds such as a custom gate, a full railing run or a BBQ pit usually involve measuring first, building parts, then installing. We will tell you the expected number of visits in the quote.

Do your welding services include painting?

We always protect bare steel with primer at minimum. Color-matched spray paint, rust-inhibiting enamel or cold galvanizing compound can be included when you ask for it in the quote. For a factory-style finish, such as powder coating, we can build or repair the part and you can take it to a powder coater, or we can discuss options.

Can you weld aluminum and stainless at my house?

Yes. Our truck carries TIG capability, which is the right process for aluminum boat trailers, ramps, stainless handrails and similar parts. Aluminum needs very clean metal and calm air, so we set up wind screens and clean the joint thoroughly. Some cast aluminum parts are not weldable, and we will tell you when that is the case.

Is there a minimum job size?

We do not turn away small residential jobs. A single broken hinge or a loose handrail post is exactly the kind of work we exist for. Travel distance and setup time are part of every quote, so it can make sense to bundle a few small repairs into one visit. Just list everything in your quote request.

Do you handle commercial welding services too?

We help small businesses, churches, schools and landlords with the same kinds of work we do for homeowners: gates, fences, railings, dumpster enclosures and trailers. Large structural steel, pressure piping or code-certified industrial work is outside what we offer, and we will say so honestly so you can find the right specialist quickly.

Not sure which service fits?

Send a photo and a sentence or two about the problem. We will match it to the right service and reply with a free written quote.

Get a Free Quote
Ornate wrought iron gate between stone pillars
San Antonio Mobile Welder logo

Mobile welding and wrought iron repair across San Antonio.

Free written quote · No obligation · Reply within one business day

San Antonio Mobile Welder

Get a free quote

Tell us what you need built or repaired. We'll reply with a clear written quote.