Quick answer
San Antonio Mobile Welder serves homeowners as a mobile welder in Converse, repairing sagging backyard and driveway gates, security doors and window bars, steel carports and patio frames, fences, trailers and BBQ pits on-site. We work from a self-powered truck, explain the fix in plain words and give a written quote before starting.
Backyard and driveway gates leveled and re-latched
Security doors and window bars repaired, with quick-release options
Rusted carport legs and patio cover frames rebuilt
Fence posts and brackets fixed on shifting clay
BBQ pits and trailers repaired in your driveway
Mobile welder in Converse: small fixes that make a big difference
Most of the jobs we take on as a mobile welder in Converse are the kind that make daily life easier. A side gate that finally closes without a shove. A security door that locks properly again. A carport that no longer wobbles in the wind. A fence that stops leaning toward the neighbor's yard. None of these are big construction projects, but each one is a real headache until it is fixed.
Converse grew quickly around FM 78, Kitty Hawk Road and Loop 1604, and many homes here are in subdivisions with similar fences, gates and patios. That means we see the same problems over and over and know how to fix them efficiently. Our truck carries its own welding generator and common steel sizes, so most jobs are done in a single visit.
We also take on work for older homes near the center of town, where you are more likely to find wrought iron fences, carports and security bars that have been in place for decades. Those pieces are often solid steel that is very repairable.
Side-yard, backyard and driveway gates
Steel-post wood fences and wrought iron fences
Security screen doors and window bars
Steel carports and patio cover frames
Porch and step railings
BBQ pits, smokers and utility trailers
Security doors, window bars and safer entryways
Steel security doors and window bars are common in Converse and across the northeast side. Over time, hinges wear, frames get bent and welds crack, especially on doors that get slammed every day. A security door that does not latch or lock is not doing its job.
We re-weld cracked frames, replace worn hinges, straighten bent panels and realign doors so they close and lock smoothly. For window bars, safety comes first. Bars on bedroom windows should have a quick-release mechanism that can be opened from inside without a key, so everyone can get out in a fire. We can add quick-release hardware to many existing bar systems or build new bars with it included. Check with the city's building or fire officials for specific requirements.
Fresh paint on security doors and bars helps them last in the sun and rain. We prime and paint every repair so it blends in and resists rust.
Carports, patio covers and steel frames in the Texas sun
Welded steel carports and patio covers are popular around Converse because they keep cars and patios shaded through long, hot summers. The weak spot is usually the legs, where water and lawn sprinklers keep the base wet and rust eats through the steel just above the slab or ground. Hail and strong storm winds can also bend frames and loosen roof panels.
We cut off rusted leg sections and weld in new steel, add base plates anchored to sound concrete, and reinforce bent rafters or beams. Damaged roof panels can usually be replaced once the frame is solid. If you are planning a new carport or patio cover, check with the city about permits and with your HOA about design rules before work begins.
For larger structures, we will be honest about whether a repair is enough or whether the frame needs more serious work. Safety matters more than saving a few dollars on a structure that holds a roof over your car or family.
San Antonio Mobile Welder services in Converse, TX
Backyard, side-yard and driveway gates leveled, braced and fitted with hinges and latches that work even as clay soil shifts.
Steel fence posts, rail brackets and wrought iron panels repaired after rust, storms or creek flooding, matched to the rest of your fence.
Utility, boat and small equipment trailers repaired on-site, from cracked tongues and broken jacks to rusted crossmembers and fenders.
Porch, step and patio railings re-anchored and repaired so they are solid for kids, guests and older family members.
Pipe gates, small pens and equipment on acreage east of Converse toward St. Hedwig, repaired where they stand.
BBQ pit and smoker repairs, security door and window bar fixes, firewood racks and backyard pieces built to fit your space.
How do you stop a backyard gate from sagging on clay soil?
Converse sits on dark, expansive clay that swells when it rains and shrinks and cracks in dry summers. That constant movement shifts fence and gate posts over time. Add a gate that is a little heavy for its hinges or a frame without a diagonal brace, and you get a gate that sags, drags or will not latch.
The fix starts with the post. If it has shifted, we reset it in a deeper footing or brace it so it stays put. Then we level the gate, weld on heavier hinges, add a diagonal brace to keep the frame square and re-weld the latch so it lines up. Adjustable hinges make it easy to fine-tune the gate if the ground moves again. See our gate repair and build page for more on how we fix and build gates.
Steel fence posts on wood privacy fences fail for similar reasons, plus rust at the ground line where sprinklers hit. We weld on new brackets, replace rusted post sections and coat welded galvanized areas with zinc-rich paint. Our fence welding service covers both steel-post and wrought iron fences.
Reset or brace posts that have shifted
Weld on heavier hinges sized for the gate
Add a diagonal brace to keep the frame square
Re-weld the latch so it catches every time
Creek-side lots and cleanup after heavy rain
Salitrillo Creek and its tributaries run through the Converse area, and like much of South Central Texas, they can rise fast during heavy storms. Homes backing onto creeks and drainage channels sometimes see fences pushed over, gates twisted and posts undermined after a big rain.
Once things dry out, we straighten or replace bent panels, reset loose posts and clean silt out of hinges and latches. For fences that get hit regularly, open picket designs let water and debris pass through more easily than solid panels. Fences near drainage easements may have rules about what can be built there, so check with the city or your HOA before rebuilding.
Trailers, BBQ pits and weekend gear around the Randolph area
Converse sits next to Joint Base San Antonio-Randolph, and many families here, military and civilian alike, keep a utility trailer for yard work and moves, plus a smoker or BBQ pit for weekend cookouts. Both take a beating. Trailers rust at the crossmembers and crack at the tongue. Pits rust through at the firebox, lose their door hinges and crack at the stack.
We repair trailer tongues, jacks, crossmembers, fenders and ramps in your driveway through our trailer repair service. For BBQ pits, we patch or replace rusted firebox panels, weld on new hinges and handles, fix grates and build new racks. You can read more about pits and other custom work on our custom metal pieces page.
If you are getting ready for a move, let us know your timeline when you request a quote. We will give you an honest window and handle any safety items first.
Neighborhoods and nearby areas around Converse
Converse City Park area
FM 78 corridor
Kitty Hawk Road area
Loop 1604 corridor
Copperfield
Northampton
Paloma
Randolph area
Universal City
Live Oak
Kirby
Windcrest
St. Hedwig
Frequently asked questions
Can you repair a security door without replacing it?
Usually, yes. Most security door problems come from worn hinges, cracked welds or a frame that has been bent out of square. We re-weld the frame, replace hinges, straighten bent parts and realign the door so it closes and locks smoothly. Replacement only makes sense when the frame is badly rusted or damaged.
Do window bars need a quick-release?
Bars on bedroom windows should open from the inside without a key so everyone can escape in a fire. Many local codes require this for sleeping rooms, but check with the city's building or fire officials for exact rules. We can add quick-release hardware to many existing bars or build new bars with it included.
Can you fix rusted carport legs?
Yes. Carport legs usually rust just above the slab or ground where water collects. We cut off the rusted section, weld in new steel and add a base plate anchored to sound concrete. If the rest of the frame is in good shape, this is much less costly than replacing the whole carport.
Is your shop in Converse?
No. We are a mobile welder based around San Antonio, and Converse is one of the nearby communities where we regularly take on residential work. We do not have an office or shop in Converse. All the work is done at your home from our self-powered welding truck.
Why does my backyard gate keep sagging?
In Converse, the usual causes are clay soil shifting the post, hinges too light for the gate and a frame without a diagonal brace. Tightening screws only helps for a little while. We reset or brace the post, weld on heavier hinges, add a brace and re-weld the latch so the gate stays level.
Can you repair my BBQ pit or smoker?
Yes. We patch or replace rusted firebox and cook chamber panels, weld on new door hinges and handles, fix cracked stacks and build new grates or racks. Thin, heavily rusted pits are sometimes not worth saving, and we will tell you honestly if building new makes more sense.