Quick answer
We build custom metal pieces for homes and small properties: BBQ pits and smoker carts, firewood racks, garage shelving, brackets and mounts, planter stands, trellises, signs and one-off decor. Pieces are welded from steel, stainless or aluminum to your measurements and finished for indoor or outdoor use, with a written quote first.
Key points
Small custom jobs welcome, from one bracket to a full smoker
Designs worked out from a sketch, photo or measurements
Steel, stainless and aluminum, sized for the real load
Finished for outdoor weather or indoor display
Installed on-site when the piece mounts to your home
What custom metal pieces can we build for you?
If it is metal and fits on a truck, there is a good chance we can make it. Most of our custom metal pieces are practical things that solve a problem around the house, with a few fun builds mixed in. Here is a sample of what homeowners ask for:
BBQ pits, offset smokers, fire pit grates and smoker carts
Firewood racks, log holders and outdoor storage frames
Garage shelving, tool racks and wall-mounted storage
TV, shelf, awning and beam brackets
Planter stands, raised bed frames and trellises
House numbers, ranch entrance signs and wall art
BBQ pits and smokers
A backyard pit is the custom build people get most excited about. We build offset smokers, open grill pits and smoker carts from heavy steel plate and pipe, with thicker walls in the cook chamber and firebox to hold steady heat. Doors get proper hinges and handles that stay cool enough to grab, and we add grates, racks, thermometer ports and wheels to fit how you cook.
We never use galvanized steel for cooking surfaces or fireboxes, because zinc coating gives off harmful fumes when heated. Cook chambers are finished with high-temperature paint on the outside and left bare inside for seasoning. We will talk through size, fuel and how many people you usually feed before we cut anything.
Racks, shelves and garage storage that hold real weight
Store-bought shelving often bows under paint cans, tool chests or bins of holiday decorations. A welded steel frame built from square tube and angle holds far more and can be sized to the exact wall, ceiling height or corner. We build overhead racks that bolt into ceiling joists, wall-mounted lumber racks, kayak and bike holders and freestanding shelving.
Firewood racks are another favorite. A simple welded frame keeps wood off the ground, lets air flow and stops termites from moving from the pile to your house. We can add a roof or slots for kindling, and size it to a cord or a fraction of one.
Brackets, mounts and parts store shelves do not carry
A lot of custom work is a single part. A bracket to hold a heavy mirror, a mount for a pergola beam, a plate to repair a broken lawn mower deck or an adapter that connects two things that were never meant to go together. These small jobs are where a mobile welder really helps, because we can measure on-site, cut and weld it, then install it in one trip.
We size brackets for the actual load, including the leverage of a long arm. If a mount will attach to masonry or framing, we use the right anchors or lag bolts and tell you where they will go. When a part needs to be stronger than a homemade weldment should be, such as anything holding a person overhead, we will say so and suggest the right engineered product.
Garden, patio and decor pieces
Metal pieces bring a lot of character to a yard. We build planter stands, raised garden bed frames, tomato cages that do not tip over, arched trellises, hose holders and boot scrapers. For decor, we cut and weld house numbers, simple silhouettes, ranch brand signs and wall art from plate or flat bar.
Some homeowners like the rich brown of weathering steel and leave pieces to rust naturally. Others want a painted or powder-coated finish. We will help you choose a look that suits your home and will not stain concrete patios with rust runoff.
From sketch to finished piece: how design works
You do not need a formal drawing. Send us whatever you have: a sketch with rough measurements, a photo of something similar, or a description of the problem. We will reply with questions about size, use and finish, then put together a simple plan and a written quote.
For larger builds, we may visit to measure and talk through options in person. Once you approve the plan, we cut and weld the piece, finish it and either deliver it or install it on-site. Pieces that need to match an existing railing or gate can borrow the same tube sizes and details.
How a custom pieces job works with San Antonio Mobile Welder
01
Share the idea
Send a sketch, photo or description with rough measurements, plus where the piece will live and what it needs to hold.
02
Agree on a plan
We reply with questions and a simple written plan covering size, material, finish and price before any metal is cut.
03
Build and finish
The piece is cut, welded, ground smooth and finished with primer and paint, high-temp coating or a clear coat.
04
Deliver or install
We drop off freestanding pieces or mount brackets, racks and signs on-site with the right anchors and hardware.
Choosing a finish for indoor and outdoor pieces
Finish decides how a piece looks after a few seasons. Indoors, a clear coat over cleaned steel shows off the metal, while black or colored paint gives a cleaner look. Outdoors, steel needs a rust-inhibiting primer and a durable top coat, or powder coating for the toughest finish. Pieces near pools or the coast do better in stainless or aluminum.
Clear coat: indoor pieces where you want raw steel character
Primer plus enamel: affordable outdoor finish, easy to touch up
Powder coat: hard, even finish for gates, racks and furniture
High-temp paint: smokers, fire pits and grill exteriors
Natural patina or weathering steel: rustic pieces away from concrete
What decides the cost of a custom piece?
Custom work is quoted after we understand the design. The biggest factors are the amount and type of metal, the number of cuts and welds, the finish and whether we install the piece. A simple bracket is a quick job; a large offset smoker with doors, racks and a cart takes much longer.
Ideas change as you see options, so we keep the quote in writing and update it if you add features. Browse our other services if your project overlaps with a repair, and read our blog for build ideas.
Frequently asked questions
Do you take on small custom welding jobs?
Yes, and we like them. A single bracket, a repaired mower deck or a small plant hanger is exactly the kind of job many shops turn down. Travel and setup are part of every quote, so it can make sense to combine a small custom piece with another repair, but we will happily quote it on its own too.
Can you build a BBQ pit or smoker?
Yes. We build offset smokers, open pits, fire pit grates and smoker carts from heavy steel plate and pipe. We talk through size, fuel and how many people you cook for, then design the firebox, cook chamber, doors and racks to match. Cooking surfaces are never galvanized, and exteriors get high-temperature paint.
What should I send to get a quote on a custom piece?
A sketch or photo of something similar, rough measurements, where the piece will go and what it needs to hold. If it mounts to your house, a photo of the wall or post helps. Mention the finish you like. We will reply with any questions and a written quote that covers materials, labor, finish and installation.
Can you make a piece from a picture I found online?
Usually, yes. A photo is a great starting point. We will ask about the size you need and how it will be used, then adjust the design so it is strong enough and fits your space. We will not copy a trademarked logo or a patented product exactly, but we can build something with a similar look and purpose.
How long does a custom build take?
Small brackets and mounts can often be measured, built and installed in a single visit. Medium pieces like firewood racks and garage shelving usually take a few days from approval to delivery. Large builds like smokers take longer because of the cutting, fitting and finishing involved. Your quote includes a realistic timeline.
Can you weld stainless or aluminum custom pieces?
Yes. We TIG weld stainless and aluminum for pieces that need to resist rust, such as poolside items, outdoor kitchen parts or coastal decor. These metals cost more than mild steel and take more care to weld, so they are best saved for places where corrosion would be a problem. We will help you decide what fits.