Quick answer
Our ranch welding service repairs pens, panels, alleys, feeders, hay rings, cattle guards and farm implements on-site. A self-powered truck lets us weld in the pasture or barn with no power hookup. We fix broken hitches, cracked frames and bent brackets, and build new gates, feeders and panels for small ranches and horse properties.
Key points
Welding done in the pasture, barn or pen, no hauling
Pens, panels, alleys, head gates and gates repaired
Cattle guards rebuilt or built new for your crossing
Shredders, box blades, hitches and loader buckets welded
Ranch welding jobs we handle most
Small ranches run on steel that gets kicked, rubbed, rammed and left out in the weather. Ranch welding on a family place is rarely one big job. It is a list of broken things that pile up until someone has time. We are glad to work through that list in a single visit.
Pipe and continuous fence panels, corral and pen repairs
Ranch gates that sag, drag or have broken latches
Hay rings, bunk feeders and mineral feeder frames
Water trough stands, float guards and pipe fitting brackets
Cattle guards, wings and the end posts that hold them
Three-point implements, hitches, drawbars and loader attachments
Pens, panels and alleys that take a beating
Cattle and horses lean, rub and push. Over time welds crack at the corners of pipe panels, gate latches tear off and sucker rod or pipe posts work loose. We reweld broken joints, add new pipe sections and set posts back in concrete or drive them deeper depending on your soil.
Working pens and alleys get special attention because a failure there can hurt an animal or a person. We look at the latches, hinge pins and sliding gates, make sure nothing has sharp edges that could cut hide, and grind every weld smooth. If you want to add a sorting gate or a bud box, we can build and weld it in place.
Cattle guards: repairs and new builds
A cattle guard has two jobs: keep livestock in and carry every truck and trailer that crosses it. Rails crack where they meet the base, wings get bent by trailer tires and the concrete or timber footing settles. We reweld rails, replace broken pipes, straighten or rebuild wings and add new crossmembers where the old ones rusted out.
For new cattle guards, the rail spacing and depth of the pit matter as much as the steel. We build frames from heavy pipe or rail stock sized to the vehicles you expect to cross, and we can tell you what kind of base will hold up in your soil. Heavy commercial traffic, such as loaded grain trucks, may need an engineered, load-rated guard, and we will say so honestly.
Implements, hitches and loader attachments
Shredders, box blades, post hole diggers, hay spears and front-end loader buckets all crack eventually. Common repairs include cracked shredder decks and tail wheel brackets, broken three-point lift arms and pins, torn bucket corners and worn cutting edges. We weld them on the spot so the tractor can get back to work.
On heavy, dirty or painted steel, we usually stick weld because it handles wind, rust and thick sections better than wire. Parts that see a lot of wear, like bucket edges and box blade teeth, can be hard-faced with wear-resistant rod to last longer. For trailers that haul livestock or hay, see our trailer repair page.
Welding old, rusty and unknown steel in the field
Ranch steel is often recycled: drill pipe, sucker rod, guardrail and parts from equipment that is older than the person who owns it. That steel can be harder or more brittle than ordinary mild steel. We clean it to bright metal, preheat thick or high-carbon parts when needed, and choose electrodes that tolerate unknown chemistry.
Cast iron parts, like some older gearbox housings and implement castings, are tricky to weld and sometimes crack again from the heat. We will tell you when a cast part is a good candidate for repair and when a replacement casting or a bolted plate is the smarter path.
How a ranch & equipment job works with San Antonio Mobile Welder
01
Send the list
Photos of each repair, a short description and directions to the property help us plan materials and time.
02
Plan the route
We confirm truck access, gates and animals, and pick a day when wind and ground conditions are workable.
03
Weld on location
Our self-powered rig drives to each spot. We clean, weld, reinforce and grind with a fire watch in place.
04
Walk it with you
We go over every repair, point out anything else that looks close to failing and leave the area clean.
Planning a ranch visit so it goes smoothly
Ranch calls work best with a little planning. Make a list of everything that needs welding, with photos, and send it through the quote form. Tell us how to reach each spot: whether our truck can drive to the pen, whether there are locked gates, and whether animals need to be moved first.
Dry grass is a real fire risk around welding. We carry a fire extinguisher and water, wet down the area and keep a fire watch after the last weld, but clearing tall grass around the work spot ahead of time helps. On windy days, we may move work into a barn or reschedule. If your place also needs pipe fence repair or a new ranch gate, add it to the list.
List every repair with a photo and a rough location on the property
Note access: truck route, locked gates, soft ground after rain
Move livestock away from pens being welded
Clear dry grass a few feet around each work spot if you can
Pricing ranch welding fairly
Ranch work is quoted by the list. Travel and setup are a fixed part of any visit, so bundling five repairs into one trip usually makes better sense than calling for each one separately. The amount of new pipe or plate, the thickness of the steel and the time spent moving between spots on the property all affect the total.
We give you a written quote that lists each item, so you can decide what to do now and what can wait until next season. If you are outside the city on acreage, check our service areas to see where we take on ranch work.
Frequently asked questions
Can you weld in my pasture with no electricity?
Yes. Our welding truck carries its own engine-driven generator, so we do not need any power from your barn or house. As long as we can drive reasonably close to the repair, we can weld it. If ground is soft after rain, let us know so we can plan a route or wait until it firms up.
Do you repair cattle guards?
Yes. We reweld cracked rails, replace broken pipes, straighten or rebuild bent wings and add new crossmembers. We can also build new cattle guards sized for the vehicles that cross them. For heavy commercial truck traffic, an engineered and load-rated guard may be required, and we will tell you honestly if your crossing needs one.
Can you fix my shredder or box blade?
Usually, yes. Cracked shredder decks, broken tail wheel brackets, bent three-point arms and worn box blade edges are common field repairs. We clean the area, weld it with stick or wire depending on thickness and conditions, and add reinforcement plates where cracks keep coming back. Gearboxes and blades themselves are replaced, not welded.
What about fire risk when welding outside?
We take it seriously. We wet down and clear the area around each weld, use spark blankets, keep a fire extinguisher and water ready and stay to watch the area after the last weld. On very dry, windy days or during burn bans, we may reschedule outdoor work or move it into a barn or onto bare ground.
Can you build new pipe pens or feeders?
Yes. We build pipe panels, small pens, sorting gates, hay feeders and trough stands to fit your layout and animals. Simple builds are often welded on-site from pipe we bring. Larger projects may involve a measuring visit first, then a build day. Tell us the animals, the size and how you work them, and we will suggest a design.
Is ranch welding priced by the hour?
We quote each visit in writing based on the list of repairs, the materials and the travel involved, rather than leaving you to guess at an hourly total. The quote breaks out each item so you can choose what to fix now. Bundling several repairs into one visit is usually the most economical approach for a small ranch.