Home / Service Areas / Boerne, TX

Boerne, TX

A mobile welder in Boerne for Hill Country acreage, ranch gates and family homes

Out in Kendall County, a gate might hang between stone columns at the end of a long caliche drive, and a fence line might run across solid rock. We bring the welder, generator and steel to your place and fix it right where it stands.

Black metal railings on a modern staircase

Quick answer

San Antonio Mobile Welder takes on residential and small-ranch work as a mobile welder in Boerne. We repair and build ranch entry gates, pipe and deer fence, corner braces, pens, troughs and porch railings on-site, set posts properly in Hill Country limestone, and provide a written quote before any work begins.

Heavy entry gates rehung between stone or steel columns

Posts anchored in solid limestone and caliche

Pipe corner braces that keep deer and goat fence tight

Pens, troughs and cattle guards repaired in the pasture

Fire-safe welding habits for dry grass and burn ban season

Why Boerne acreage keeps a mobile welder busy

A lot of Boerne homes sit on a few acres or more, and acreage comes with metal. There is the entry gate, a perimeter fence, maybe a pipe pen for a couple of horses or goats, a feeder, a cattle guard and a trailer that hauls all of it. Working as a mobile welder in Boerne, most of our jobs are on those properties, plus railings and gates at homes in town.

Hauling a 16-foot pipe gate or a set of pen panels to a shop is a project in itself. Bringing the shop to you is simpler. Our truck carries its own welding generator, cutting tools and common steel sizes, so many repairs are finished in one visit.

Brown metal fence near trees

Ranch entry gates hung between stone columns

The classic Boerne entrance is a wide steel or wrought iron gate set between limestone columns, often with a ranch name or brand across the top. Those gates are heavy, and over time the hinge pins that were set into the masonry work loose. The gate drops, the latch side drags on the drive, and the opener strains to move it.

Our fix depends on what is inside the column. If there is a steel post or a solid core, we weld new heavy-duty hinges to it. If the hinges were only anchored into mortar, we often add a steel post or plate tied back into the column so the load goes into steel instead of stone. We then square up the gate frame, add a brace if it is missing, and adjust it so it swings level.

If you are adding a solar or electric opener, tell us when you request a quote. Openers need a gate that swings freely by hand first, plus a solid spot to mount the arm. Our gate repair and build page covers how we set gates up for automation.

Hinge pins pulled loose from mortar joints

Gate frames racked out of square from their own weight

Latch side dragging on caliche or concrete

Opener arms with cracked mounting brackets

Is it possible to set a gate post in solid limestone?

Yes, and around Boerne it is often the only option. In many spots there are just a few inches of soil, then caliche, then solid rock. Posts that were set shallow because the auger hit rock are one of the most common reasons we see leaning gates and sagging corners.

To do it right, we drill or chip into the rock deep enough to give the post real support, then set it in concrete or grout. For lighter fence line posts, a smaller hole into sound rock can hold better than a deep hole in loose soil. For heavy gate posts, we may also weld a brace or a deadman to spread the load.

Where the rock is fractured or there is a pocket of clay, the plan changes. We look at the ground before we quote, and if a post needs more than a weld to stay put, we will explain why.

High fence, deer and goats: keeping fence lines tight

Hill Country deer put real pressure on fences, and many Boerne owners run high fence or game fence to keep them out of gardens or to manage wildlife. Goats test every weak spot in a fence and will climb anything they can. In both cases, the corners and gate openings take most of the strain.

Welded pipe H-braces and corner assemblies are what keep wire tight for years. When a corner leans, the whole run goes slack. We rebuild or reinforce those braces, weld on new wire stays and tension points, and repair pipe line posts that have rusted at the ground. Our fence welding service covers both pipe ranch fence and decorative iron near the house.

San Antonio Mobile Welder services in Boerne, TX

Wide ranch entry gates and walk gates rehung between stone or steel columns, braced square and set up to work smoothly with solar or electric openers.

Pipe ranch fence, game fence corners and decorative iron near the house repaired or extended, with posts set solidly into limestone and caliche.

Livestock, flatbed and utility trailers repaired at your barn or driveway, from cracked tongues and jack mounts to rusted floor supports and ramp hinges.

Porch, stair and deck railings for Hill Country homes and older houses near Main Street, matched to the existing style and anchored firmly to stone or framing.

Pipe pens, alleys, hay feeders, water troughs and cattle guards repaired in the pasture, with fire-safe welding practices during dry months.

Ranch name signs over entry gates, firewood racks, fire pit rings and outdoor kitchen frames built for Hill Country homes.

Pens, troughs and cattle guards on small Hill Country ranches

Plenty of Boerne-area properties keep a few head of cattle, horses, goats or sheep. That means pipe pens, alleys, hay feeders and water troughs that get pushed, rubbed and kicked every day. Welds crack, hinges wear and panels bend.

We repair pens and gates in place, build new panels and feeders, and fix cattle guards that have cracked or settled. Cattle guards in particular should be checked by someone who can judge whether a repair will hold the weight of the trucks and trailers that cross them. You can see more of that work on our ranch and equipment page.

Before we arrive, it helps to move animals away from the work area and tell us about any gate codes. Welding sparks and curious horses do not mix, and we want everyone safe.

Main Street and Boerne's older homes near Cibolo Creek

Boerne was settled by German immigrants, and the area around Main Street and Cibolo Creek still has older stone and frame homes with porches, stoops and simple iron railings. Old solid iron and steel weld well, so those pieces are usually worth repairing instead of replacing.

We match the original picket size, spacing and caps, and fix rusted feet where railings meet stone. Changes visible from the street in historic parts of town may need city review, so check with the city's planning or historic preservation staff before replacing a front railing or fence. Repairs that keep the same design are usually simple.

Gated communities with architectural review

Communities like Esperanza, Cordillera Ranch and Tapatio Springs often have design guidelines covering fence style, height, color and materials. A repair that matches what is already there is rarely an issue, but a new gate, a fence extension or a different finish may need approval first.

We can provide a dimensioned sketch and a list of materials and finish colors to include with your application. Getting approval before the work starts saves everyone the trouble of changing a finished gate later. Many of these neighborhoods also have gate codes or contractor check-in rules, so let us know what to expect at the entrance.

What changes when the job is down a long caliche road?

Rural work is a little different from a driveway in town. We ask about road access for the truck, whether there are low-water crossings that close after heavy rain, and how far the repair is from where we can park. Our welding leads reach a long way, but a fence corner a quarter mile into a pasture may need a different plan.

Dry grass is the other big concern. Summer and drought months bring high fire danger, and the county sometimes has burn bans in place. Welding sparks can start a grass fire, so we clear or wet down the area, keep water and an extinguisher at hand, and watch the site after we finish. If conditions are too dry and windy, we will reschedule rather than take the risk. Check current county rules if you are unsure.

Heat matters too. We plan pasture work for the cooler part of the day whenever possible, both for crew safety and for a better paint finish on the repair.

Gate codes and directions to the work spot

Animals moved away from the work area

Notes on low-water crossings or soft ground

A photo of the whole gate or fence corner

Neighborhoods and nearby areas around Boerne

Downtown Boerne

Esperanza

Cordillera Ranch

Tapatio Springs

Fair Oaks Ranch

Regent Park

Boerne Lake area

Bergheim

Kendalia

Sisterdale

Comfort

Waring

Leon Springs

Frequently asked questions

Can you weld a ranch gate without taking it off the columns?

In most cases, yes. We support the gate, weld new hinges or brackets in place, square the frame and add bracing if it is missing. Removal only makes sense when the frame is badly bent or a column has to be rebuilt. Working in place keeps the gate where it belongs and usually finishes the job in one visit.

Why does my fence corner keep leaning?

Corner and end posts carry all the tension of the wire. If the brace is too short, poorly welded or the post was set shallow in rocky ground, it slowly pulls over and the whole run goes slack. We rebuild the H-brace or corner assembly, set the post deeper into rock where needed and re-tension the fence.

Do you work on properties outside Boerne city limits?

Yes. Much of our Boerne-area work is on acreage in Kendall County and nearby communities. We are a mobile welder based around San Antonio, not a shop in Boerne, so we travel to you. Send your location and a photo with your quote request, and we will confirm whether we can make the trip and when.

Is it safe to weld during a burn ban?

Burn bans focus on outdoor burning, and welding rules vary, so check current county guidance. Either way, we treat dry grass as a serious fire risk. We clear or wet the area, keep water and an extinguisher on hand, use spark shields and watch the site after we finish. On very dry, windy days we reschedule.

Do I need approval in Esperanza or Cordillera Ranch?

Communities with design guidelines often require approval for new gates, fence changes or different finishes. Like-for-like repairs are usually fine. Check with your property owners association before the work starts, and we can supply a sketch with dimensions, materials and paint color to include with the request so approval goes smoothly.

Can you build a ranch sign to go over my entry gate?

Yes. We build overhead entry arches and cut-steel name signs that mount between columns or over a gate. The frame has to be sized for wind and anchored firmly, so we look at the posts or columns before quoting. Plain steel can be left to weather to a rust patina or painted to match your gate.

Get your Boerne gate, fence or pen fixed where it stands

Send a photo, your general location and any gate codes we will need through the quote form. We will reply with a free written quote. Read more about how we work or see our other service areas.

Get a Free Quote
Ornate wrought iron gate between stone pillars
San Antonio Mobile Welder logo

Mobile welding and wrought iron repair across San Antonio.

Free written quote · No obligation · Reply within one business day

San Antonio Mobile Welder

Get a free quote

Tell us what you need built or repaired. We'll reply with a clear written quote.